beautypg.com

Exiting image scale option, Setting the vector halftone option, The vector halftone purpose – Xerox 8825 User Manual

Page 76: Path to the vector halftone option, Setting the date and time option, The purpose of the date and time option, Setting the diagnostics page option, Purpose of the diagnostics page

background image

8825/8830 Controller Setup Manual for Firmware 6.0

60

Configuring the Printer Setup Defaults (continued)

Setting The Diagnostics Page Option

Purpose of the Diagnostics Page

The purpose of this option is to enable the Controller to print a diagnostic
page for each print job.

Note: The diagnostics page is the only sure method of determining the actual
parameter values used to produce the output page for the actual job,
including those parameters that are modified by the job itself. While the
Printer Settings test print page contains the same parameters, the values
shown in the Printer Settings page are the active parameter default settings
for all jobs, and not necessarily the values used by a particular job.

ENABLING EACH PRINT JOB TO BE FOLLOWED BY A PRINTED COPY
OF THE JOB PROCESSING PARAMETERS USED BY THE PRINT JOB.

Range: OFF or ON

Default: OFF

PATH TO DIAGNOSTICS PAGE OPTION

Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] as required to display PRINTER>, press [ENTER], display , press [NEXT],
display

SELECTING DIAGNOSTICS PAGE OPTION

Press the ENTER key to display ENABLE. Press ENTER to change the
option. Press the NEXT key to select either ON or OFF. When the desired
mode is displayed press the ENTER key.

EXITING DIAGNOSTICS PAGE OPTION

Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.