Setting the top margin option, Assigning a pen color number, Assigning a pen pattern number – Xerox 8825 User Manual

Page 116: Assigning a pen width value, Path to pen palette options, Selecting the pen palette options, Top margin purpose

Text mode
Original mode

8825/8830 Controller Setup Manual for Firmware 6.0

100

Configuring the Printer Processing Defaults (continued)

Setting the Top Margin option

Top Margin Purpose

The purpose of this option is to set the default value for the top margin of the
print in millimeters.

Range: 0 – 2540 mm

Default: 5 mm

PATH TO TOP MARGIN OPTION

Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is
displayed, press [ENTER], display , press
[NEXT] until is displayed.

SELECTING THE TOP MARGIN OPTION

Press the ENTER key to change the option. Enter the value desired on the
Keypad (0 - 2540) then press the ENTER key.

EXITING THE TOP MARGIN OPTION

Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.