Xerox 8825 - Manual (Page 126)

8825/8830 Controller Setup Manual for Firmware 6.0 110
Configuring the Printer Processing Defaults (continued)
Setting the Page Rotate Set Option
Purpose of Set Page Rotate Option
This option sets the printer for auto-rotating each page for best fit to the
available media, or to a specified preset of rotation.
Range: 0, 90, 180, 270, or AUTO
Default: AUTO
This is applied in the following priority order:
• Instructions embedded within a print job’s native data format are applied
with highest priority.
• Parameters specified through job control instructions (such as HP-PJL)
associated with the print job are applied next.
• Printer default parameters are applied to all remaining unspecified
parameters.
PATH TO THE SET PAGE ROTATE OPTION
Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is
displayed, press [ENTER], display , press
[NEXT] until is displayed.
SELECTING THE SET PAGE ROTATE OPTION
Press the ENTER key to change the option. Press the NEXT key to toggle
through the selections AUTO, 0, 90, 180, or 270, and when the desired
selection is displayed, press the ENTER key.
EXITING THE SET PAGE ROTATE OPTION
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.