Xerox 8825 - Manual (Page 100)

8825/8830 Controller Setup Manual for Firmware 6.0 84
Configuring the Printer Setup Defaults (continued)
Setting The Vellum Mismatch Option
Vellum Mismatch Purpose
This option sets the media size mismatch recovery mode. When set to
SCALING, the printer will scale the print to the nearest vellum roll to your
requested print size. When obtaining the correct sheet size is important, you
should specify QUERY. When set to QUERY, the printer pauses until the
correct media is installed. To continue printing other jobs or pages when a
mismatch occurs, you can separately set the option “Mismatch Queuing
Enable” to ON to place the job in a Mismatch Queue for later resolution. If
SUBSTITUTE is selected, the printer will look for a substitute media size or
media type on which to print the requested job in a 1:1 ratio, or scaled to fit
the available media rolls.
Range: SCALING, QUERY, SUBSTITUTE
Default: SCALING
PATH TO VELLUM MISMATCH OPTIONS
Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is displayed,
press [ENTER], display , press [NEXT] until MISMATCH MODE> is displayed.
SELECTING THE VELLUM MISMATCH OPTIONS
Press the ENTER key to change option. Press the NEXT key until the desired
mode QUERY or SCALING is displayed, then press the ENTER key.
EXITING VELLUM MISMATCH OPTIONS
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.