Controller specifications(ev4 controller for 8825), Physical characteristics, Electrical requirements – Xerox 8825 User Manual

Page 29: Agency approvals, Hardware specifications, Controller port location, Printer control panel, Learning the displays, On-line indicator light, Led name

8825/8830 Controller Setup Manual for Firmware 6.0

Controller Overview (continued)

Controller Specifications(EV4
Controller for 8825)

Physical Characteristics

The Controller is attached to the side panel of the 8825 Printer as an
embedded device.

Electrical Requirements

100 - 250 VAC auto-ranging power supply.

Agency Approvals

Safety: UL 1950, CA22.2 No. 950 (CUL), EN 60950 (CE Mark)

EMC:

CE Mark, FCC Class A, Canada Radio Interference Regulations

Class A, VCCI Class 1

Hardware Specifications

CPU

Power PC 8240 (603e) operating at 250 MHz clock speed.

RAM

64MB DRAM is standard. Maximum RAM is 256MB. Two DIMM
Slots accommodate 64 or 128MB, PC100, DIMMs.

Hard disk

Ultra SCSI, 7200 rpm internal hard disk drive.