Setting the oversize margin option, Selecting the raster stamp x & y location option, Exiting the raster stamp x & y location option – Xerox 8825 User Manual

Page 120: Raster stamp rotate set option, Raster stamp rotate set option purpose, Path to the raster stamp rotate set option, Oversize margin purpose

8825/8830 Controller Setup Manual for Firmware 6.0

104

Configuring the Printer Processing Defaults (continued)

Setting the Oversize Margin option

Oversize Margin Purpose

When PAPER is set to a value for auto size detection (ANY, ANY ANSI, ANY
ARCH, or ANY ISO), then this parameter determines the threshold for
selecting a larger, installed paper size to fit the printed image within the
margin tolerances selected.

Range: 0-100%

Default: 1%

PATH TO OVERSIZE MARGIN OPTION

Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is
displayed, press [ENTER], display , press
[NEXT] until is displayed.

SELECTING THE OVERSIZE MARGIN OPTION

Press the ENTER key to change the option. Enter the over size margin %
desired on the Keypad (0 -100%) then press the ENTER key.

EXITING THE OVERSIZE MARGIN OPTION

Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.