beautypg.com

Configuring the printer setup defaults, Path to the date and time option, Selecting the date and time option – Xerox 8825 User Manual

Page 75: Exiting the date and time option, The purpose of the time out setting, Selecting the time out option, Exiting the time out option, Setting the maximum plot length option, Setting the banner page options, Banner page purpose

background image

8825/8830 Controller Setup Manual for Firmware 6.0

59

Configuring the Printer Setup
Defaults

Setting The Banner Page Options

Banner Page Purpose

The purpose of this option is to enable the printing of a separator banner
page and set whether to have the banner page printed before or after the
print job.

ENABLING THE PRINTING OF A BANNER PAGE FOR EACH JOB.

Range: ON or OFF

Default: OFF

SPECIFYING WHETHER THE BANNER PAGE IS TO BE PRINTED
BEFORE OR AFTER THE JOB.

Range: BEFORE JOB, or AFTER JOB

Default: BEFORE JOB

PATH TO BANNER PAGE OPTIONS

Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is displayed,
press [ENTER], display

Note: When enabled, the banner page will be printed on the narrowest
media size available and be cut to the shortest possible length.

Selecting Banner Page options

Press the ENTER key to display . Press ENTER again to change
the option. Press the NEXT key to select either ON or OFF. When the
desired mode is displayed press the ENTER key.

Press the NEXT key to display position. Press the ENTER key to change the
position option. Press the NEXT key to select Before Job or After Job. When
the desired mode is displayed press the ENTER key.

EXITING BANNER PAGE OPTIONS

Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.