Xerox 8825 - Manual (Page 138)

8825/8830 Controller Setup Manual for Firmware 6.0 122
Configuring the Printer Processing Defaults (continued)
Label Rotate Option
Purpose of Label Rotate Option
This option sets the rotation of the label string before it is applied to the page.
Range: 0 - 359 degrees
Default: 90 degrees
PATH TO THE LABEL ROTATE OPTION
Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is
displayed, press [ENTER], display , press
[NEXT] until is displayed, press ENTER, press NEXT until
is displayed.
SELECTING THE LABEL ROTATE OPTION
Press the ENTER key and use the Keypad to change the option. Press
ENTER to confirm.
EXITING THE LABEL ROTATE OPTION
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.