Setting the undersize margin option, Selecting the raster stamp option, Exiting the raster stamp option – Xerox 8825 User Manual

Page 121: Raster stamp x & y location option, Purpose of raster stamp x & y location option, Path to the raster stamp x & y location option, Undersize margin purpose

8825/8830 Controller Setup Manual for Firmware 6.0

105

Configuring the Printer Processing Defaults (continued)

Setting the Undersize Margin option

Undersize Margin Purpose

When PAPER is set to a value for auto size detection (ANY, ANY_ANSI,
ANY_ARCH, or ANY_ISO), then the undersize margin option determines the
threshold for selecting a smaller, installed paper size to fit the printed image
within the tolerances selected.

Range: 0-100%

Default: 2%

PATH TO UNDERSIZE MARGIN OPTION

Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is
displayed, press [ENTER], display , press
[NEXT] until is displayed.

SELECTING THE UNDERSIZE MARGIN OPTION

Press the ENTER key to change the option. Enter the under size margin %
desired on the Keypad (0 -100%) then press the ENTER key.

EXITING THE UNDERSIZE MARGIN OPTION

Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.