Job printing/processing specifications, Network protocols, Platforms supported – Xerox 8825 User Manual
Page 33: Auto port sensing, Client software, Windows 95/98 platforms, Windows nt 4.0 & 2000 platforms, European union, Canada, Japan

8825/8830 Controller Setup Manual for Firmware 6.0
17
Controller Overview (continued)
Job Printing/Processing Specifications
Network Protocols
Legacy 3003-XTP NIC (replaced by External Ethernet Adapter)
TCP/IP (lpr/lpd, telnet, TFTP puts,...)
EtherTalk
Novell IPX/SPX PServer for Ver. 3.x and 4.x w/NDS
NetBEUI
DLC/LLC
10/100 Ethernet Card/Port
TCP/IP only
External Ethernet Adapter (optional on all Controllers)
TCP/IP, Novell 3.x, 4.x, 5.x, and NetBEUI
Platforms supported
SUN OS and Solaris
Windows 95/98/NT 4.0/2000
Auto Port Sensing
Yes. Ports may also be enabled or disabled remotely.
Client Software
Windows 95/98 platforms:
• HP-GL/2/RTL Print Driver
• ADI Driver for AutoCAD R13/14
• HDI Driver for AutoCAD 2000 and 2000i
• PostScript PPD System Print Driver
• AccXES Client Tools
• Web PMT (requires Firmware Release 4.0 or higher)
Windows NT 4.0 & 2000 platforms:
• HP-GL/2/RTL Print Driver
• ADI Driver for AutoCAD R13/14
• HDI Driver for AutoCAD 2000 and 2000i
• PostScript PPD System Print Driver
• AccXES Client Tools
• Web PMT (requires Firmware 4.0 or higher)