Setting the image scale option, Setting the image density (toner) option, Image density purpose – Xerox 8825 User Manual
Page 81: Setting the toner density, Selecting image density option, Exiting image density option, Image scale purpose

8825/8830 Controller Setup Manual for Firmware 6.0
65
Configuring the Printer Setup Defaults (continued)
Setting The Image Scale Option
Image Scale Purpose
The purpose of this option is to define the default scale function as either line
or photo mode.
Note: This option only applies to raster image files such as TIFF, CALS 1
and 2, NIFF, etc. It has no effect on vector image files such as HPGL/2,
CGM, or PostScript.
SETTING THE DESIRED DEFAULT MODE FOR SCALING DOWN
IMAGES
Setting this option to LINE will preserve fine lines when the image is scaled
down. The option has no effect when image files are enlarged.
When the PHOTO setting is used, raster image files that are reduced in size
through the use of the Printer’s SCALE option may lose fine lines in some
cases.
Range: LINE or PHOTO
Default: PHOTO
PATH TO IMAGE SCALE OPTION
Display
display
press [ENTER], display
SELECTING IMAGE SCALE OPTION
Press the ENTER key to change the option. Press the NEXT key to select
PHOTO or LINE, then press the ENTER key with the desired selection
displayed.
EXITING IMAGE SCALE OPTION
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.