Setting the parallel option, System administration menu, Setting the merge control option – Xerox 8825 User Manual

Page 73: Setting the reinitialize after eof option, Selecting the hpgl emulation options, The purpose of the parallel option

8825/8830 Controller Setup Manual for Firmware 6.0

Configuring the System Communication Defaults
(continued)

Setting The Parallel Option

The Purpose of the Parallel Option

The purpose of this option is to enable the Controller parallel port.

Software drivers may be required to be loaded at the customer workstation to
enable printing and control of the 8825/8830 Printer.

SETTING THE CONTROLLER PARALLEL PORT EITHER ON OR OFF.

Range: ON or OFF
Default: ON

PATH TO THE PARALLEL OPTION

Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT], display , press
[ENTER], display , press [NEXT] until is displayed.

SELECTING THE PARALLEL OPTION

Press ENTER to display the PORT ENABLE option. Press the ENTER key to
change the option. Press the NEXT key to select either ON or OFF. When
the desired mode is displayed press the ENTER key.

EXITING THE PARALLEL OPTION

Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.