beautypg.com

Setting the date and time option, Before or after the job, The purpose of the date and time option – Xerox 8825 User Manual

Page 83

background image

8825/8830 Controller Setup Manual for Firmware 6.0

67

Configuring the Printer Setup Defaults (continued)

Setting The Date and Time Option

The Purpose of the Date and Time Option

This utility sets the date and time that is used to time stamp the banner
pages, error pages, and plot labels.

Note: The date/time function is year 2000-compliant until the year 2038.

PATH TO THE DATE AND TIME OPTION

Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is displayed,
press [ENTER], display , press [NEXT] until AND TIME> is displayed.

SELECTING THE DATE AND TIME OPTION

Press the ENTER key to display MONTH. Press ENTER to enable changes.
Press ENTER again to confirm changes. Press NEXT to display DAY,
YEAR, HOUR, MINUTE, and SECONDS. Use ENTER to enable and confirm
changes.

EXITING THE DATE AND TIME OPTION

Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode. Press EXIT to set up additional functions.