Setting the finisher options, Setting the electronic collation option, Electronic collation purpose – Xerox 8825 User Manual
Page 112: Path to electronic collation option, Selecting the electronic collation option, Exiting electronic collation option, Finisher option purpose
8825/8830 Controller Setup Manual for Firmware 6.0
96
Configuring the Printer Processing Defaults (continued)
Setting the Finisher options
Finisher Option Purpose
The purpose of this option is to select the default folding style. Available
selections depend on the folder model installed.
This option is to be selected when the On-line Folder is installed.
Range: FOLD BYPASS, FOLD 190, FOLD 210, FOLD 190 MARGIN, FOLD
ANSI A, FOLD ARCH A, FOLD 7.5X11, or FOLD 7.5X11 MARGIN
Default: FOLD BYPASS
PATH TO THE FINISHER OPTION
Display
display
displayed, press [ENTER], display
[NEXT] until
SELECTING THE FINISHER OPTION
Press the ENTER key to change option. Press the NEXT key to toggle
through the selections and when the desired selection is displayed, press the
ENTER key.
EXITING THE FINISHER OPTION
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.