Xerox 8825 - Manual (Page 113)

8825/8830 Controller Setup Manual for Firmware 6.0 97
Configuring the Printer Processing Defaults (continued)
Setting the Finishing Long Plot Option
Purpose
For the finishing of long plots of up to 48 feet with 64MB of RAM and 80 feet
with 96MB of RAM, when equipped with an optional On-line Folder you can
specify long plot finishing of NO FOLD or Z FOLD.
Range: NO FOLD, Z FOLD
Default: NO FOLD
PATH TO THE FINISHING LONG PLOT OPTION
Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is
displayed, press [ENTER], display , press
[NEXT] until is displayed.
Press the [ENTER] key to enable option changing. Press the [NEXT] key to
toggle through the selections and when the desired selection is displayed,
press the [ENTER] key. Press [EXIT} to escape the current menu or press
[ON-LINE] to put the printer back on line.