Xerox 8825 - Manual (Page 135)

8825/8830 Controller Setup Manual for Firmware 6.0 119
Configuring the Printer Processing Defaults (continued)
Label String Set Option
Purpose of Label String Option
When this option is set to the default NONE (no label text file named), a label
is not applied during printing. When this option is set to ID, the named label
text (of up to 4096 characters) contained in the displayed file is printed. The
label text, font, shading, and the position on the print is user-defined. Use the
Printer Manager Tool (PMT) software (under the Printer Setup group and Plot
Labels sub-group) to set up the label string. Click Update Printer to set the
label text string at the controller.
Range: NONE, or ID: NAME TIME DATE (user-defined with PMT)
Default: NONE
PATH TO THE LABEL STRING OPTION
Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is
displayed, press [ENTER], display , press
[NEXT] until is displayed, press ENTER and is
displayed.
SELECTING THE LABEL STRING OPTION
Press the ENTER key, then the NEXT key, to change the option. Press
ENTER to confirm your selection.
EXITING THE LABEL STRING OPTION
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.