Displaying the mismatch queue, Purpose, Path to displaying the mismatch queue – Xerox 8825 User Manual
Page 64: Working with jobs in the mismatch queue
8825/8830 Controller Setup Manual for Firmware 6.0
48
Displaying The Mismatch Queue
Purpose
The purpose of this feature is to provide access to the “Mismatch Queue”
which provides for continuous printing when a requested media type or size is
not installed and scaling to fit existing sizes of installed media, or printing on
any type of installed media, are not acceptable options. When “Bond
Mismatch,” “Film Mismatch,” and/or “Vellum Mismatch” options of the “Setup
Printer” menu are set to “Query,” with “Mismatch Queuing Enable” set to ON,
print jobs or pages within a print job with mismatches for printer installed
media will be sent to the mismatch queue without blocking the flow of other
printing pages or jobs. The pages or jobs in the mismatch queue can be
viewed, printed, or canceled using the path described below.
Note: An active Mismatch Queue
containing media mismatched pages
or jobs
is indicated by an * in the upper right hand corner of the Printer
Control Panel.
Path to Displaying the Mismatch Queue
At the Printer Control Panel when the display shows
LINE]. When the display shows
display shows
[ENTER] to display
queue. Press the [NEXT] or [PREVIOUS] keys to move through the queue of
mismatched pages or jobs.
Working with Jobs in the Mismatch
Queue
For each item displayed in the Mismatch Queue ( by pressing [PREVIOUS] or
[NEXT] ) follow the on screen directions to clear the mismatched page or job
from the queue. You can cancel the page or job by pressing the “C” key on
the Printer Control Panel’s keypad. After canceling, press [ENTER] to
confirm, or [EXIT] to escape.
Press [EXIT] any time to escape the current menu. Press the [ON-LINE] key
to put the printer back on line.