Xerox 96MX - Manual (Page 98)

SPECIFYING INPUT PARAMETERS
4-6 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
POSTAMBLE
This parameter specifies the length in bytes of the extraneous data
at the end of each tape block; that is, it is an offset from the end of a
block backwards to the end of the last logical record.
Syntax BLOCK POSTAMBLE = option(s)
Options Table 4-10 lists the parameter option(s) and definition(s).
PREAMBLE
This parameter specifies the length of the operating system portion
of the block, that is, the byte offset from the first byte of a tape block
to the first byte of the first logical record.
Syntax BLOCK PREAMBLE = option(s)
Options Table 4-11 lists the parameter option(s) and definition(s).
Table 4-10. POSTAMBLE parameter option(s) and definition(s)
Option(s) Definition(s)
value An integer in the range of 0 (the default) to block
length.
The default is 0.
Table 4-11. PREAMBLE parameter option(s) and definition(s)
Option(s) Definition(s)
value An integer in the range of 0 (the default) to block
length.
The default is 0.