Xerox 96MX - Manual (Page 247)

PRINT FORMAT COMMANDS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 6-73
SYSPPR
This parameter specifies the system page paper size for a job.
Syntax OUTPUT SYSPPR = option(s)
Options Table 6-65 lists the parameter option(s) and definition(s).
There is no default.
Considerations When centimeters (CM) are used to specify paper size, the maximum
allowable value is 32.767 cm.
SYSPPR is not available as a DJDE.
Whether you use the keyword or the (x, y) method, for specifying
papersize in your JSL, you must use the same method in your forms
source library (FSL).
PAPERSIZE=B4 and PAPERSIZE=(10.12,14.33) produce identical
results in that they indicate long-edge feed, as opposed to short-edge
feed format. Refer to the “SEFFNT” section in the chapter “Specifying
input parameters” for detailed information on short- and long-edge
feed.
Table 6-65. SYSPPR parameter option(s) and definition(s)
Option(s) Definition(s)
USLEGAL 8.5 by 14 inches (216 by 279 mm)
A3 16.54 by 11.69 inches (420 by 297 mm)
A4 8.27 by 11.69 inches (210 by 297 mm)
B4 10.12 by 14.33 inches (257 by 364 mm)
USLETTER 8.5 by 11 inches (216 by 279 mm)
( x, y) x defines the slow scan direction in inches.
y defines the fast scan direction in inches.