Xerox 96MX - Manual (Page 120)

SPECIFYING INPUT PARAMETERS
4-28 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
Mapping files
A font mapping associates one font to another font. A collection of
font mappings may be stored in a mapping file. Font files are files
having the FNT extension and are stored on disk.
The SEFFNT command is used to enable or disable the short-edge
feed feature. SEFFNT creates customized mapping files (of type LIB)
or triggers the system to invoke short-edge feed processing. It must
be used in conjunction with a PDE. The SEFFNT command format is
as follows:
[ label:] SEFFNT
SEFMAP={( font
1
, font
2
)[,( font
m
,, font
n
)]|NONE}
MAP = file-name
Table 4-34 lists the parameter definitions, and the parameter
option(s) and definition(s).
The SEFFNT command has different effects depending on the
context:
• Bypassing font mapping
•
Mapping contained in the JDL
• Standalone mapping files
• JDL creates a mapping file.
The following sections describe the syntax of the command
parameters and explanations of the parameter options.
Table 4-34. SEFMAP and MAP parameters and parameter
option(s) and definition(s)
Option(s) Definition(s)
label Specifies the name of the mapping file that is to be
created. If the label does not exist, the SEFFNT
command either creates an internal table or uses an
existing mapping file if MAP is specified. If the [label]
option is omitted, SEFMAP puts all mapping within a
JDL rather than creating a file on the system disk.
SEFMAP Sets up the font mapping. In each specified font pair,
the second font is the SEF mapping for the first font.
Multiple level mappings are not allowed.
( font
1
,
font
2
)
Font pair in which font
2
is the SEF mapping for font
1
.
( font
m
, ,
font
n
)
Font pair in which font
m
and font
n
is the SEF mapping
for font
1
.
NONE Disables font mapping and short-edge feed; stops
previous SEFFNT.
MAP References a previously defined font mapping file
(
file-name) from a [label:]SEFFNT command.