Xerox 96MX - Manual (Page 212)

PRINT FORMAT COMMANDS
6-38 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
PCCTYPE
This parameter specifies a carriage control set used in printing a job.
Syntax LINE PCCTYPE = option(s)
Options Table 6-30 lists the parameter option(s) and definition(s).
Table 6-30. PCCTYPE parameter option(s) and definition(s)
Option(s) Definition(s)
pcc-name Options are:
• ANSI
•
B2500
• B2700
• B3500
•
B3700
•
B4700
• B6700
• H6000
•
H2000
•
IBM4245
Creation of a user-defined PCC table referenced by
either an identifier id or the keyword USER is defined
using the PCC command. Refer to the “PCC
command” section in this chapter. For offline
systems the default is ANSI. For online systems the
default is IBM3211. Note that there is no functional
difference between IBM3211 and IBM4245 for PCC
types. For HOST=ICL2900 the PCCTYPE is forced
to NONE.
The INITIAL parameter (refer to the “PCC command”
section in this chapter) for any selected PCCTYPE
(except ANSI or HOST=RSX11, USER, and id) is
TOF. For ANSI or HOST=RSX11, the INITIAL
parameter is BOF. For USER or id the INITIAL
parameter is set by the user in the PCC command.
The ADVTAPE parameter (refer to PCC parameter in
this chapter) for any selected PCCTYPE (except
IBM1403, IBM3211, USER, and id) is YES. For
IBM1403 and IBM3211/IBM4245, ADVTAPE is set to
NO. For USER or id the ADVTAPE is set by the user
in the PCC parameter. Refer to the
Xerox LPS Tape
Formats Manual for more information on PCCTYPE
tables.
The default is ANSI offline.
The default is IBM3211/IBM4245 online.