Xerox 96MX - Manual (Page 307)

USING LOGICAL PROCESSING
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 7-27
TEST
This parameter defines test expression for offsetting pages to the
stacker tray.
Syntax ROFFSET TEST = option(s)
Options Table 7-19 lists the parameter option(s) and definition(s).
There is no default.
Points to note
Note the following when using the ROFFSET command:
• The ROFFSET feature prints the record satisfying the test
expression according to the normal job parameters.
•
If ROFFSET is specified for an uncollated job, an offset occurs
on only the first copy of the offset page.
• If a record satisfying the ROFFSET test criteria is not selected
for or deleted from printing, the offset indication is maintained
and used on the next record printed.
•
If OFFSET=FIRST (or ALL) and the ROFFSET criteria is
satisfied on the first page of a report, the normal offset from the
preceding report is nullified.
•
If segments are specified, the ROFFSET command is ignored.
Table 7-19. TEST parameter option(s) and definition(s)
Option(s) Definition(s)
test-exp The format and syntax of a test-exp are defined in the
“Test expression definition” section. If a test-exp is
satisfied, the record causes an offset in the stacker
tray. If a
test-exp is satisfied in duplex mode, the
logical page on which the record occurs is the first
logical page of a new sheet.