Xerox 96MX User Manual
Page 380
SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-52
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
SF1FUNCTION
This parameter specifies to the finisher whether (YES) or not (NO) to
begin a particular operation on the current sheet. SF1FUNCTION
invokes the C6 signal of the electronic interface between the LPS
and a third party finishing device. Refer to your vendor’s third party
device documentation for detailed information.
Syntax
SF1FUNCTION =
option(s)
Options
Table 8-48 lists the parameter option(s) and definition(s).
SF2FUNCTION
This parameter specifies to the finisher whether (YES) or not (NO) to
begin a particular operation on the current sheet. SF1FUNCTION
invokes the C7 signal of the electronic interface between the LPS
and a third party finishing device. Refer to your vendor’s third party
device documentation for detailed information.
Syntax
SF2FUNCTION =
option(s)
Options
Table 8-49 lists the parameter option(s) and definition(s).
Table 8-48.
SF1FUNCTION parameter option(s) and
definition(s)
Option(s)
Definition(s)
YES
Specifies to the finisher to begin a particular
operation on the current sheet.
NO
Specifies to the finisher not to begin a particular
operation on the current sheet.
Table 8-49.
SF2FUNCTION parameter option(s) and
definition(s)
Option(s)
Definition(s)
YES
Specifies to the finisher to begin a particular
operation on the current sheet.
NO
Specifies to the finisher not to begin a particular
operation on the current sheet.