Xerox 96MX - Manual (Page 445)

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE E-1
E. E Editor quick reference
This appendix summarizes the basic Editor commands and steps for
creating and modifying JSLs. For detailed information on using the
Editor, refer to your
Xerox DocuPrint 96/DocuPrint 96MX LPS
Operations Reference.
Note that you may enter the Editor commands by keying in only the
first three letters, for example, CLEAR can be entered as CLE, and
INSERT can be entered as INS.
Creating a new file on system disk
When you have prepared your JSL and are ready to enter it onto
system disk, you must use the Editor. To use the Editor for coding
your JSL, follow these steps:
Step 1. Gain access to the file by entering the Editor. Enter:
LOG 3, password
Step 2. Begin the editing session by entering:
EDIT
Step 3. Clear the work file of all data, enter:
CLEAR
Step 4. Verify the new file name you have selected and protect existing files
by entering:
GET file-id
The file-id consists of the file name and file type, represented as file-
name.file-type, for example XAMPLE.JSL.
A message appears on the system controller display if a file already
exists with the
file-id you have selected. To protect the original file,
clear the work file, rename your file, and repeat the GET file-id
command.