beautypg.com

Xerox 96MX User Manual

Page 248

background image

PRINT FORMAT COMMANDS

6-74

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE

TMODE

This parameter specifies paper sizes in order to improve throughput
efficiency.

Syntax

OUTPUT TMODE =

option(s)

Options

Table 6-66 lists the parameter option(s) and definition(s).

Width values can range from the 8-inch equivalent to the 17-inch
equivalent.

If you use inches (the default), refer to the table in the “Points to note”
section for the value ranges, pages-per-minute speeds, and uses
available for the various pitch modes.

The default depends on the specified paper size; the default value is
in inches.

Table 6-66.

TMODE parameter option(s) and definition(s)

Option(s)

Definition(s)

(

width

[,

width unit])

This option has the following components:

width
The process direction measurement that
determines the default pitch mode.

width unit
Defines the unit of measurement for the default
pitch mode in IN, CM, DOTS, and XDOTS.

IN (INCHES) is the default.