Xerox 96MX - Manual (Page 334)

SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-6 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
Record-oriented
Record-oriented DJDEs take effect immediately at the next record
following the last record of the set of DJDE records of which they are
a part; that is, after an END parameter, a compiled record-oriented
DJDE takes effect immediately.
The exception is the OVERPRINT DJDE, which takes effect at the
next logical page boundary if FONTINDEX has been invoked in a
JDE or DJDE. These DJDEs also may appear at report boundaries
to change all pages in a report (or report-ply).
Table 8-2 lists the record-oriented DJDEs.
Table 8-3 lists graphic DJDEs that are record-oriented.
Table 8-2. Record-oriented DJDEs
DJDE Function
ASSIGN Assigns a VFU channel to a page line number or set of
line number.
BOF Specifies the bottom-of-form line number.
C text Allows comment text in the DJDE record.
DATA Specifies the location and length of printable data
within an input record.
END Specifies the end of DJDE information.
FILE Enables files to load to the system disks while a print
job is in progress.
OVERPRINT Provides instructions to the system when overprint
lines (print lines whose carriage control specifies
printing with no line spacing since the last printed line).
TOF Specifies the top-of-form line number.
Table 8-3. Record-oriented DJDEs
DJDE Function
ALTER Specifies the new imaging parameters for graphics.
BATCH Permits normal processing on online banner pages for
batch mode jobs.
CANCEL Cancels automatic reimaging (hold) of IMAGE or
GRAPHICS parameters.
GRAPHIC Specifies that the DJDE is a graphic sentinel.
IMAGE In batch mode, defines the new imaging parameters for
the graphic.
SAVE Specifies IMG files updated the current report which
are not to be purged when the report’s output
processing is completed.