Xerox 96MX User Manual
Page 159
SPECIFYING INPUT PARAMETERS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
4-67
Points to note
Note the following:
•
DJDEs, banner, and other logical processing functions are not
honored when running in the dump mode, so an operator
ENDJOB command must be entered to end the dump session.
•
NO-OP command from the host is not dumped since it is
intercepted and processed by the OLI hardware and is
transparent to the LPS software.
•
Hardware errors are reported in the system error log, but are
not dumped due to Host, OLI, or driver interface constraints.
•
Commands processed when input is stopped, for example,
when paper trays become empty, are not dumped.
•
Print records longer than the specified RECORD LENGTH
value are truncated without warning. If records longer than 150
bytes are to be sent, the RECORD LENGTH parameter in the
online dump JDE/JDL should be modified to the longer length.
•
Entering the operator SAMPLE command (with parameters) is
not allowed while the system is online, whether or not a job is
running. Exceptions to this are: pressing the
entering the operator SAMPLE command with no parameters.
•
Operator “HIP START ...” command is accepted, but HIP is
unable to submit a print job while the system is online.