Xerox 96MX - Manual (Page 137)

SPECIFYING INPUT PARAMETERS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 4-45
INTERPRESS
This parameter provides additional control over the Interpress
environment.
Syntax VOLUME INTERPRESS = option(s)
Options Table 4-47 lists the parameter option(s) and definition(s).
Table 4-47. INTERPRESS parameter option(s) and
definition(s)
Option(s) Definition(s)
YES Specifies that the data stream is Interpress. NO is not
an option.
[CHECKSUM | NOCHECKSUM] This option has the following components:
• CHECKSUM
Enables error-checking procedures on a job
basis. If CHECKSUM is specified and
verification fails, the job aborts.
• NOCHECKSUM
Disables the error-checking procedures.
This default is NOCHECKSUM.
[BREAKPAGE | NOBREAKPAGE] This option has the following components:
•
BREAKPAGE
Requests a trailing break page is printing
instructions are present in the job.
•
NOBREAKPAGE
Specifies a break page only if the system
detects errors.
This default is NOBREAKPAGE.
INTEGRAL • INTEGRAL
Requests integral scale factors from 1 to 8 for
IMG, IM6, and most RES (Xerox Compressed)
images.
PERFORMANCE • PERFORMANCE
Specifies, with the raster imager processor (RIP)
that raster encoding standard (RES) files
containing sampled color are imaged by the
graphics hardware whenever possible. The RIP
is used only when graphics hardware
capabilities are exceeded.