Xerox 96MX - Manual (Page 385)

SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 8-57
SRECOVER
This parameter specifies the recovery mode. When used as a DJDE,
SRECOVER must be specified prior to the first data record in the
report or it is ignored.
Syntax SRECOVER = option(s)
Options Table 8-54 lists the parameter option(s) and definition(s).
Table 8-54. SRECOVER parameter option(s) and definition(s)
Option(s) Definition(s)
PAGE Specifies standard jam recovery. The printer will
resume with the first sheet not delivered.
SEGMENT Specifies the reprinting of the entire segment that
was being printed at the time of the jam.
ASK Specifies that the operator be requested through the
user interface to select PAGE or SEGMENT
recovery.
DEVICE DEVICE - Places recovery mode selection
responsibility with a support third party finishing
device through connection with the Xerox
DocuPrint 96/DocuPrint 96MX LPS bypass transport
option.