Xerox 96MX - Manual (Page 225)

PRINT FORMAT COMMANDS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 6-51
COLLATE
This parameter specifies whether pages are to be collated or
uncollated.
Syntax OUTPUT COLLATE = option(s)
Options Table 6-38 lists the parameter option(s) and definition(s).
Refer to the “Points to note” section in this chapter for additional
information.
COPIES
This parameter specifies the number of report copies to be printed.
Syntax OUTPUT COPIES = option(s)
Options Table 6-39 lists the parameter option(s) and definition(s).
Table 6-38. COLLATE parameter option(s) and definition(s)
Option(s) Definition(s)
YES Specifies that the output pages are collated
The default is YES.
NO Specifies that the output is not collated. If
DUPLEX=YES, then COLLATE=NO is ignored.
Note that if NTO1=YES, PDL overrides
COLLATE=NO with COLLATE=YES and notes this
action with a warning in the JSL.
Table 6-39. COPIES parameter option(s) and definition(s)
Option(s) Definition(s)
number An integer value with range 1 (the default) to 32767.
For the copies DJDE parameter, a value of 0 may be
specified for the DJDE COPIES parameter, in which
case no copies are printed. The copies parameter on
the START command allows an operator to override
this parameter when initiating a print job.
The default is 1.