Xerox 96MX - Manual (Page 226)

PRINT FORMAT COMMANDS
6-52 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
COVER
This parameter specifies that cover pages are to be picked from the
AUX cluster. These cover pages may be placed at the front or back
of each copy of a report.
Syntax OUTPUT COVER = option(s)
Options Table 6-40 lists the parameter option(s) and definition(s).
Considerations The FEED MAIN operator command (refer to the Xerox
DocuPrint 96/DocuPrint 96MX LPS Operations Reference) should
be used in conjunction with this parameter to prevent the AUX tray
from being automatically selected when the MAIN tray becomes
empty. This can be used in combination with the FEED parameter on
the OUTPUT command and the FEED DJDE parameter (refer to the
chapter “Specifying dynamic job descriptor entries (DJDEs)”).
If RTEXT is specified alone with (FRONT, SEP) or (BOTH, SEP),
RTEXT pages are printed on the covers, and front covers are picked
only on copies for which there is RTEXT. (Refer to ROUTE
commands for further details on RTEXT.)
Refer to the “Job parameter modification restrictions” section in the
chapter “Specifying dynamic job descriptor entries (DJDEs)” for more
information on COVER specified in a selected JDE.
Table 6-40. COVER parameter option(s) and definition(s)
Option(s) Definition(s)
NONE Specifies that no cover pages are to be picked.
The default is NONE.
FRONT Specifies that a cover page is to be picked (from the
aux cluster) at the front of each copy and is the first
page of the copy.
SEP Specifies that each front cover does not have any
data printed on it; also, no report data is printed on
the back of a SEP cover.
BACK Specifies that a cover page is to be picked at the end
of each copy. No report data is printed on back
covers.
BOTH Specifies that both front and back cover pages are to
be picked and the front of each copy is the first page
of the copy.