Xerox 96MX - Manual (Page 97)

SPECIFYING INPUT PARAMETERS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 4-5
LTHFLD
This parameter specifies the length of the field containing the block
length.
Syntax BLOCK LTHFLD = option(s)
Options Table 4-8 lists the parameter option(s) and definition(s).
OFFSET
This parameter specifies the location of the block length field.
Syntax BLOCK OFFSET = option(s)
Options Table 4-9 lists the parameter option(s) and definition(s).
Table 4-8. LTHFLD parameter option(s) and definition(s)
Option(s) Definition(s)
value Specifies the length in bytes of the field containing
the block LENGTH specified above. The size is an
integer in the range of 0 (the default) to 5. If size is set
to 0, the block length field is not considered to be part
of the block, and the length of a block, on tape, is the
actual block length.
The default is 0.
Table 4-9. OFFSET parameter option(s) and definition(s)
Option(s) Definition(s)
value Specifies the block length field offset. This offset is
the number of bytes from the first byte of a block to
the block length field. A value is an integer in the
range 0 (the default) to LENGTH-LTHFLD-1.
The default is 0.