Xerox 96MX - Manual (Page 274)

PRINT FORMAT COMMANDS
6-100 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
STOCKSET command
The STOCKSET command defines a set of stocks used in a report.
This allows output to verify the exclusivity of all stocks in terms of
trays currently assigned to them. For your LPS, a stock-name is
represented by a cluster. For more information refer to the feeder tray
chapter in your
Xerox DocuPrint 96/DocuPrint 96MX LPS Operator
Guide.
Stocksets are also the means of associating stock references with
stock names.
An identifier (of the type ac) is specified to name the STOCKSET
command for future reference by the STOCKS parameter of an
OUTPUT command.
Table 6-81 summarizes the STOCKSET command parameters.
The following sections describe the syntax of the command
parameters and explanations of the parameter options.
ASSIGN
This parameter associates stocks with the identified stockset.
Syntax ac:STOCKSET ASSIGN = {stock-descriptor | ( stock-descriptor
1
[, stock-descriptor
2
][,...])}
Function Associates stocks with the identified stockset, where:
Options stock-descriptor = stock=name | (stock-name,stock-reference)
Default No default
Table 6-82 lists the parameter option(s) and definition(s).
Table 6-81. Summary of STOCKSET command parameters
Parameter Specifies Offline Online DJDE
ASSIGN Lists stock names and association of stock
references with stock names Y Y N
INIFEED Specifies which stock to use in the absence of any
parameters of the FEED parameter Y Y N
SYSPAGE Specifies which stock to use for system-generated
messages Y Y N
Table 6-82. ASSIGN parameter option(s) and definition(s)
Option(s) Definition(s)
{ stock-descriptor |
( stock-descriptor
1
[, stock-descriptor
2
]
[,...])}