Xerox 96MX - Manual (Page 332)

SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-4 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
Table 8-1. Page-oriented DJDEs
DJDE Function
BEGIN Specifies the location of the starting print line of a
logical page for graphics.
BFORM Specifies that a form be printed on the back side of a
printed page.
COLLATE Specifies whether the pages of a job are to be collated
(placed into sets) or uncollated (like pages placed
together).
COPIES Specifies the number of copies or sets of the pages to
produce.
DEPT Specifies the accumulation of accounting statics for
reports on a name basis.
DESTINATION Specifies the output destination of printed pages.
DUPLEX Specifies whether both sides of a piece of paper are
printed (duplex) or only to top side (simplex).
FEED Controls the stock (type of paper) on which the page is
printed.
FONTINDEX Specifies a particular location in the input record where
an index to the specified font is stored.
FONTS Specifies the fonts used in input data or variable (CME)
data.
FORMAT Specifies that a new page descriptor entry (PDE) is
used for formatting control.
FORMS Specifies the form to be merged on the printed pages.
INVERT Specifies that an image is to be inverted.
ITEXT Specifies a text message to be displayed to operators
during the input process.
JDE Specifies the JDE to be used within the selected JDL at
the next page boundary.
JDL Specifies the name of the JDL to be invoked at the next
page boundary.
MAP References a previously created font mapping file.
MARGIN Specifies the left printing margin within each logical
page.
MODIFY Specifies the CME to be used on the page to override
an existing CME.
NUMBER Specifies page numbering control.
OTEXT Provides a text message to be displayed to the
operator during job printing.
PMODE Specifies the printing mode for each page (either
landscape or portrait).
RFORM Specifies whether a form is printed on all RTEXT
pages.