Xerox 96MX - Manual (Page 296)

USING LOGICAL PROCESSING
7-16 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
TEST
For online jobs, this parameter defines the test expression for
detection of a banner page for either change mode or constant mode
criteria.
Syntax BANNER TEST = option(s)
Options Table 7-11 lists the parameter option(s) and definition(s).
TYPE
This parameter specifies the use of selected data pages as banner
pages when reports do not contain this information
Syntax BANNER TYPE = option(s)
Options Table 7-12 lists the parameter option(s) and definition(s).
Table 7-11. TEST parameter option(s) and definition(s)
Option(s) Definition(s)
test-exp The format and syntax of a test-exp are defined in the
“Test expression definition” section. If a test-exp is
satisfied, the page containing the record tested is
considered a banner page.
There is no default.
Table 7-12. TYPE parameter option(s) and definition(s)
Option(s) Definition(s)
DATA For online jobs, use when reports do not contain
user-specified banner pages. This parameter allows
the user to treat selected data page(s) as banner
pages for report separation. This type of banner page
is printed with a form (if specified). In duplex mode,
this type of banner page is printed as a duplex page
with data on the back. If multiple PDE begins are
specified and TYPE=DATA, only the first header
page of the report is repositioned to the first logical
page of a new physical sheet.
BANNER Should be coded when reports contain user-
specified banner pages. These banner pages are
printed without forms. In duplex mode, the banner
pages are printed with blank backs.
The default is BANNER.