Xerox 96MX - Manual (Page 242)

PRINT FORMAT COMMANDS
6-68 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
PURGE
This parameter specifies whether or not the system should delete
graphic disk files at the end of report. This is only true for document
interleaved.
Syntax OUTPUT PURGE = option(s)
Options Table 6-58 lists the parameter option(s) and definition(s).
A DJDE SAVE specification may be used to override the purging of
specific files.
RESOLUTION
This parameter defines the output coordinate system (300 or 600
spots per inch). 300 specifies that output, including fonts, forms,
images, and logos, be printed at 300 spots per inch (spi). 600 refers
to all fonts, forms, images, and logos in FN6, FR6, LG6, and IM6
directories. The Resolution statement is only included for
compatibility. The Xerox DocuPrint 96/DocuPrint 96MX LPS accepts
300 spi fonts, forms, images and logos and converts them to 600 spi
using the majority interpolation scheme for printing. The Xerox
DocuPrint 96/DocuPrint 96MX LPS cannot accept 600 spi fonts,
forms, images, and logos. On systems printing at 600 spi, references
in the JSL to 1IN, 2.54 cm, or 300 dots are converted to a pixel count
of 600 spi in the JDL, the system converts all measurements to
XDOTS.
Syntax OUTPUT RESOLUTION = option(s)
Options Table 6-59 lists the parameter option(s) and definition(s).
The default is sysgen parameter (300 spi on the Xerox DocuPrint 96/
DocuPrint 96MX LPS).
Table 6-58. PURGE parameter option(s) and definition(s)
Option(s) Definition(s)
NO Specifies that graphic disk files should not be
deleted.
YES Specifies that all IMG graphics files created or
replaced by document interleaved graphic
processing for this report should be deleted at the
end of the report printing.
The default is YES.
Table 6-59. RESOLUTION parameter option(s) and
definition(s)
Option(s) Definition(s)
300 Specifies 300 spots per inch.
600 Specifies 600 spots per inch.