Xerox 96MX - Manual (Page 278)

PRINT FORMAT COMMANDS
6-104 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
ASSIGN
This parameter specifies the output line-to-channel assignments.
Syntax ac:VFU ASSIGN = option(s)
Options Table 6-86 lists the parameter option(s) and definition(s).
BOF
This parameter specifies the bottom-of-form line number
Syntax ac:VFU BOF = option(s)
Options Table 6-87 lists the parameter option(s) and definition(s).
Table 6-86. ASSIGN parameter option(s) and definition(s)
Option(s) Definition(s)
( channo,lineno) This option has the following components:
• channo
The number of the channel being assigned. It is
an integer in the range 0 to 15. The user may
end the VFU command with a semicolon and
start another VFU command without an id field
to continue specification for the same channel
or a different channel.
• lineno
The number of the output print line being
assigned to a particular channel. It is an integer
in the range TOF to BOF. There are no default
assignments for any channel, including
channels 1, 9, and 12.
Table 6-87. BOF parameter option(s) and definition(s)
Option(s) Definition(s)
value Specifies the number of lines from the top of the
output page to the last print line on the page (bottom
of form). The bottom-of-form specification is
independent of channel assignments. Bottom of form
should be greater than or equal to the largest line
number assigned to a channel. The maximum value
for BOF is 255.
The default is 66 (VFU command).