Xerox 96MX - Manual (Page 216)

PRINT FORMAT COMMANDS
6-42 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
Examples
This section shows examples of using the LINE command.
Example 1
LINE DATA=(1,132),PCC=(0,NOTRAN),
PCCTYPE=IBM1403,FONTINDEX=133;
The LINE command above defines the characteristics of the
following record structure shown in figure 6-4.
Figure 6-4. Sample data record structure
The print-data-offset parameter of the DATA parameter (the number
of bytes between the start of the user portion of the record and the
first character of the record to be printed) is 1 byte. A sample is
shown in figure 6-5. The print-length parameter (the number of
characters in the longest print line in the record) is defined as 132
bytes. The carriage control is defined as IBM1403, and the position
of the carriage control character is the first byte within the user
portion of the record. The position of the font index (an index value
into a font list that indicates which font is to be selected) is byte 133
(relative to 0).
Example 2
LINE PCCTYPE=NONE, DATA=(1,60), VFU=V1;