Xerox 96MX - Manual (Page 219)

PRINT FORMAT COMMANDS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 6-45
ITEXT
This parameter specifies a text message to be output to the operator
during input processing.
Syntax MESSAGE ITEXT = option(s)
Options Table 6-34 lists the parameter option(s) and definition(s).
Considerations Hexadecimal strings used in a MESSAGE command are interpreted
as standard EBCDIC and are translated to extended ASCII.
Table 6-34. ITEXT parameter option(s) and definition(s)
Option(s) Definition(s)
NONE Specifies that no text message is output to the
operator during input processing.
The default is NONE.
sc Specifies a text message of up to 80 characters.
passnum Specifies the pass (copy ply) to which the message
text applies. The message is output to the operator
just before processing of the indicated pass (copy
ply) is begun. If no pass number is specified, the
indicated message is output at the beginning of the
first pass.
WAIT Specifies that after the text is displayed, printing is
suspended until the operator has responded with a
CONTINUE parameter.