Xerox 96MX User Manual

Page 136

SPECIFYING INPUT PARAMETERS

4-44

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE

Considerations

For online systems, you must specify IBMONL or OLDUMP.

For Ethernet, you must specify ENET.

For HOST=ICL2900, the PCCTYPE is always specified as NONE.

For HOST=RSX11(FLX), you must specify the DATA command.

For HOST=DUMP, two tape marks at the end of the tape are required
to dump the data tape using DUMP.JSL.

If a selected HOST type is inconsistent with a selected LABEL type,
the PDL issues an error message and automatically substitutes a
valid label. Do not code the LABEL parameter of the VOLUME
command in cases where it is not appropriate for a particular HOST
type. Refer to the “Offline specifications“ appendix for more
information on offline formats.

If an online job (JDE) is called out in an offline JDL that changed the
system default values, the job may print incorrectly. If this happens,
separate and run online and offline jobs independent from each other