Xerox 96MX - Manual (Page 194)

PRINT FORMAT COMMANDS
6-20 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
FONTS
This parameter specifies an index into the font list (PDE command or
DJDE) for font switching on input data or CME data. A PDE
command is selected by the FORMAT parameter of the OUTPUT
command.
Syntax ac:CME FONTS = option(s)
Options Table 6-15 lists the parameter option(s) and definition(s).
Considerations A font specification applies to input variable data as well as static
CME data. If a line number (LINE) and character position
(POSITION) but no insertion text (CONSTANT) are specified, the
font change specified applies to input variable data at the position
specified.
Table 6-15. FONTS parameter option(s) and definition(s)
Option(s) Definition(s)
value May range from 1 to n, where n is the number of
different fonts specified by the FONTS parameter of
the PDE command. A value of 1 specifies the first
font in the FONTS parameter, 2 the second, and so
forth. The default for a value is the current font
(specified with the last FONTS parameter; initially the
value is 1).
There is no default.