Xerox 96MX - Manual (Page 357)

SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 8-29
DUPLEX
This parameter specifies whether printing is to occur on both sides of
a page (duplex mode) or a single side (simplex mode). It takes effect
on the next page boundary.
Syntax DUPLEX = option(s)
Options Table 8-23 lists the parameter option(s) and definition(s).
END
This parameter specifies the end of DJDE information. When an END
parameter is encountered, the system applies all DJDE information
specified to the current printing environment at the next page or
record boundary. Note that after an END parameter, a DJDE is
compiled and record-oriented DJDEs take effect immediately.
Syntax END
Table 8-23. DUPLEX parameter option(s) and definition(s)
Option(s) Definition(s)
YES Selects duplex printing.
NO Selects simplex printing.