Xerox 96MX - Manual (Page 203)

PRINT FORMAT COMMANDS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 6-29
SRECOVER
This parameter specifies the mode of jam, or error, recovery.
Syntax EXPORT SRECOVER = option(s)
Options Table 6-22 lists the parameter option(s) and definition(s).
Example SRECOVER=SEGMENT;
STIMING
This parameter is provided for possible compatibility with other Xerox
software supporting third party finishing devices. This parameter is
ignored by the Xerox DocuPrint 96/DocuPrint 96MX LPS.
Syntax EXPORT STIMING = ([INTERVAL, sec][,DELAY,sec])
Table 6-22. SRECOVER parameter option(s) and definition(s)
Option(s) Definition(s)
PAGE Specifies standard recovery. The printer resumes
with the first sheet not successfully delivered.
The default is PAGE.
SEGMENT Specifies reprinting of the entire currently printing
segment. Since it is possible for sheets of multiple
segments to be in the paper path at the same time,
the segment most advanced in the paper path
without being successfully delivered is the starting
recovery position.
ASK Specifies that the operator be requested through the
user interface to select PAGE or SEGMENT
recovery.
DEVICE Places recovery mode selection responsibility with a
Device Finishing Architecture (DFA)-compliant
finishing device through the LPS bypass transport
option.
If the DEVICE recovery option is specified and output
is directed to a destination other than the bypass
transport, the PAGE recovery option prevails.