Xerox 96MX - Manual (Page 301)

USING LOGICAL PROCESSING
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 7-21
Points to note
Note the following when using the RAUX command:
• If a record intended to satisfy the criteria for RAUX is
suspended by RSUSPEND, that record is not checked for the
RAUX criteria. Note that the RAUX criteria does not take effect
when printing is resumed (offline only).
•
Record selection/deletion is performed prior to RAUX
processing. If a record satisfying the RAUX test criteria was
previously not selected for or deleted from printing, the RAUX
does not function (offline only).
•
Since DJDE processing occurs prior to RAUX processing,
DJDE records are not checked for satisfying the RAUX criteria
(offline only).
Example
Following is an example of using the RAUX command:
T1: TABLE CONSTANT=’CUSTOMER COPY’;
C1: CRITERIA CONSTANT=(20,13,EQ,T1);
RAUX TEST=C1;
Figure 7-3.
The data record, when processed as part of the input data stream,
causes the page it is a part of to be printed on a sheet of paper fed
from the auxiliary tray. The Xs are depicted in the above example
only to illustrate the specified offset of 20 character positions.
The following section describes the syntax of the command
parameters and explanations of the parameter options.