Xerox 96MX - Manual (Page 114)

SPECIFYING INPUT PARAMETERS
4-22 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
LTHFLD
This parameter specifies the length of the field containing the record
length.
Syntax RECORD LTHFLD = option(s)
Options Table 4-28 lists the parameter option(s) and definition(s).
OFFSET
This parameter specifies the location of the record length field.
Syntax RECORD OFFSET = option(s)
Options Table 4-29 lists the parameter option(s) and definition(s).
Table 4-28. LTHFLD parameter option(s) and definition(s)
Option(s) Definition(s)
size Specifies, in bytes, the record length field length. It
must be an integer in the range 0 to 5. If the size is
set equal to zero, record lengths are not contained in
the records, and the record length is the maximum
length (LENGTH) for each record.
The default is 0.
Table 4-29. OFFSET parameter option(s) and definition(s)
Option(s) Definition(s)
value Specifies the record length field offset. This offset is
the byte offset from the first byte of the record to the
record length field. A value must be an integer in the
range 0 (the default) to LENGTH-LTHFLD-1.
The default is 0.