6print format commands – Xerox 96MX User Manual
Page 175

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
6-1
6.
6
Print format commands
Print format commands serve many different functions, the most
common of which specify the physical characteristics of a print job,
define the placement of data on the page, and identify system
responses to error conditions.
Table 6-1 summarizes these PDL commands. The function, syntax,
and usage of the parameters available with these commands are
described in individual sections of this chapter.
Table 6-1.
Summary of print format commands
Command
Function
ABNORMAL Specifies operations security and page offset on jam
recovery.
ACCT
Defines user and system accounting requirements.
CME
Allows certain parts of report output to be replaced on
copies with predefined static data or to specify font
changes within variable data.
EXPORT
Directs printing of segments and segment recovery.
LINE
Controls margin, overprinting, carriage control, and
so forth.
MESSAGE
Sends message to operator during input or output
processing.
OUTPUT
Controls printing mode, forms, paper size and type,
offsetting and output destination.
PDE
Defines page format (page orientation, fonts).
ROUTE
Sends message and form for a routing page.
STOCKSET
Defines a set of stocks used in a report.
VFU
Defines vertical format control.