Xerox 96MX - Manual (Page 336)

SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-8 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
OPRINFO
This parameter specifies whether the DJDE record is to be printed to
the tray or not.
Syntax OPRINFO = option(s)
Options Table 8-5 lists the parameter option(s) and definition(s).
All non-Interpress system-generated pages, such as accounting
sheet, error summary, OPRINFO, recovery marker, and report
separator are printed in the same xerographic mode as the previous
page to prevent unnecessary xerographic mode switching (XMS).
The exception to the rule is when the default ink is a primary color
and the previous page’s xerographic mode is BLACK. Accounting
sheets always print using the system default ’BLACK’ ink. The ink
used to print all other non-Interpress system generated pages
depends on the xerographic mode of the previous page and the
default ink.
PREFIX
This parameter specifies an sc identifier, which is the search criterion
for recognizing DJDE records. It is a byte string of up to 255
characters represented as a hexadecimal, octal, BCD, ASCII, or
EBCDIC character constant (as described in the “Right-part
constants” section of the "Overview" chapter).
Syntax PREFIX = option(s)
Options Table 8-6 lists the parameter option(s) and definition(s).
Table 8-5. OPRINFO parameter option(s) and definition(s)
Option(s) Definition(s)
YES Specifies that the DJDE record is to be printed and
delivered to the tray.
NO Specifies that the DJDE record will not be printed.
The default is NO.
Table 8-6. PREFIX parameter option(s) and definition(s)
Option(s) Definition(s)
sc Any records within the data stream which contain an
identification field equal to the specified prefix string
sc are recognized and processed as DJDE records.
There is no default.