Export command – Xerox 96MX User Manual
Page 199
PRINT FORMAT COMMANDS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
6-25
EXPORT command
A “segment” is a set of consecutively delivered sheets whose
management as a set or segment has been specified by PDL or
DJDE command.
The EXPORT statement enables specification in PDL of the new
Segment Management capabilities, including the following:
•
Division of reports into segments
•
Generation of separator sheets
•
Use of segment numbers on separator sheets
•
Use of segment recovery in place of page recovery.
Although the EXPORT command is primarily intended to be used
with the bypass transport option, it functions with any allowable
destination. If the OUTPUT command DESTINATION parameter
specifies BIN, segments are offset relative to each other when
delivered, and offsetting resulting from other commands is not
processed.
Table 6-18 summarizes the EXPORT command parameters.
The following sections describe the syntax of the command
parameters and explanations of the parameter options.
Table 6-18.
Summary of EXPORT command parameters
Parameter
Specifies
Offline
Online
DJDE
SEPARATORS
Retain an internal copy of the first data page and use it to
generate segment separator sheets
Y
Y
Y
SNUMBER
Print the segment number on generated segment separator
sheets
Y
Y
Y
SPLIT
The conditions for ending segments and turning segment
management on
Y
Y
Y
SRECOVER
Recovery mode
Y
Y
Y
STIMING
This command is listed for compatibility only. It is not supported
on the Xerox DocuPrint 96/DocuPrint 96MX LPS
Y
Y
Y