Global analog trunk parameters – Nortel Networks BCM200/400 User Manual
Page 378
378
Appendix H Market profile attributes
N0060612
N0060612
Global analog trunk parameters
This section contains information for the GATM4 and GATM8 MBMs. The information in the
tables applies to downloaded profiles only; it is not applicable to DIP switch modes.
Global analog trunks are not supported in the following market profiles: Denmark, France,
Germany, Holland, Italy, Norway, Spain, Sweden, and Switzerland.
For PRC and Hong Kong, analog trunks are available in North American DIP switch mode only.
The global analog trunk parameters are provided in the following tables:
•
Localization, PSTN standards, and pulse dialing parameters (see
)
•
Transmission parameters (see
)
•
Call supervision parameters (see
)
•
On-hook caller ID, disconnect supervision, and message waiting parameters (see
Table 104 Localization, PSTN standards, and pulse dialing parameters (Sheet 1 of 2)
Market profile
Localized
PSTN standards
Pulse Dialing (ms)
Break
time
Make
time
Interdigit
time
Australia
Yes
[1] AS/ACIF S003:2005 (2nd
Edition) — Customer Access
Equipment for Connection to a
Telecommunications Network
[2] AS/ACIF S002:2001 —
Analogue interworking and
non-interference requirements for
Customer Equipment for connection
to the Public Switched Telephone
Network
85
15
860
Brazil
Yes
[1] Identification of the Calling Party
for SPC With DTMF, 220-250-713.
[2] Si3050 Global Voice/Data Direct
Access Arrangement Specification.
66
34
800
CALA
No
(North American
based A-law)
N/A
60
40
700
Canada
Yes
N/A
60
40
700
Caribbean
Yes
N/A
60
40
700
Global
No (North American
based A-Law)
N/A
60
40
700
Mexico
Yes
[1] Mexico general Specification,
June 9, 1993
60
40
700
New Zealand
No (UK-based
telephony with
Australian tones)
N/A
66
34
740
North America
Yes
N/A
60
40
700