Nortel Networks BCM200/400 - Manual (Page 201)

Chapter 16 Using Element Manager to set the basic parameters 201
BCM200/400 4.0 Installation and Maintenance Guide
Chapter 16
Using Element Manager to set the basic parameters
The Element Manager application provides a computer-based client interface that can connect to
devices over an IP network and display the programming interface for that device.
Through Element Manager, you can configure all of the basic parameters, which include:
• “Configuring the initial parameters” on page 203
• “Configuring the startup parameters” on page 206
Refer to the BCM 4.0 Administration Guide for more information on how to use Element Manager.
Figure 96 shows an overview of using Element Manager to set the basic parameters.
Figure 96 Overview of using Element Manager